Danh mục sản phẩm

NHÀ CUNG CẤP

Danh mục sản phẩm > > Elevator light grid > LGS100 Serie
LGS100 Serie
Mã sản phẩm LGS100 Serie
Nhà sản xuất Pepperl Fuchs

Elevator light grid

Automation light grid
Optical resolution 100 mm
Super-fast object detection, even with 3-way beam crossover
Software-free adjustment of height monitoring
Object identification using integrated object recognition
IO-link interface for service and process data
Optional temperature range to
-30 °C
Automation light grid with a beam gap of 100 mm, IO-Link interface, push-pull output, fixed cable with M12 plug



Product Description
Automation light grid with a beam gap of 100 mm, IO-Link interface, push-pull output, fixed cable with M12 plug
General specifications
Effective detection range Standard : 0.3 ... 6 m
Option /35: 0.5 ... 8 m
When beam crossover is activated, the detection range starts at 0.6 m
Threshold detection range Standard : 7.5 m
Option /35: 10 m
Light source IRED
Light type modulated infrared light , 850 nm
Field height see Table 1, max. 3000 mm
Beam spacing 100 mm
Number of beams see Table 1, max. 31
Angle of divergence 10 °
Functional safety related parameters
MTTFd 78 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 60 %
Indicators/operating means
Function display Emitter: Yellow LED, illuminates at high emitting power, off at low emitting power
Receiver: Yellow LED: illuminates when an object is detected flashes when falling short of the stability control (4 Hz)
Error message: Yellow LED flashes (8 Hz) in emitter and receiver
Controls Receiver: 2 pushbuttons for programming
Electrical specifications
Operating voltage 18 ... 30 V DC
Interface
Interface type IO-Link
Protocol IO link V1.0
Output
Switching type Factory setting: dark ON , Switchable to light ON mode
Signal output Switch output (detection field C/Q) 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected on pin 4 (receiver),
Height monitoring (H1, H2. H3) 3 push-pull (4 in 1) outputs, short-circuit proof, reverse polarity protected on pin 5, pin 6, pin 7 (receiver)
Compliance with standards and directives
Directive conformity 
EMC Directive 2004/108/EC EN 60947-5-2:2007
Standard conformity 
Product standard EN 60947-5-2:2007
IEC 60947-5-2:2007
Mechanical specifications
Protection degree IP67
Connection Emitter: 200 mm connecting cable with 4-pin, M12x1 connector
Receiver: 200 mm connecting cable with 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2
Max. cable length 30 m

» Elevator light grid - AL2012-P-1650/49/76a: 0 VND (AL2012-P-1650/49/76a)
» Elevator light grid - AL2109-P-1820-3403/40b/49/143: 0 VND (AL2109-P-1820-3403/40b/49/143)
» Elevator light grid - AL2109-P-1820-EX2/25/49/115/133/76a: 0 VND (AL2109-P-1820-EX2/25/49/115/133/76a)
» Elevator light grid - AL2109-P-1820/40b/49/143: 0 VND (AL2109-P-1820/40b/49/143)
» Elevator light grid - AL4012-P-1650/49/76a: 0 VND (AL4012-P-1650/49/76a)
» Elevator light grid - AL4016-P-1650/49/76a: 0 VND (AL4016-P-1650/49/76a)
» Elevator light grid - LG16-G-150-K-2-W: 0 VND (LG16-G-150-K-2-W)
Liên Hệ Trực Tuyến

Tel: (08) - 6675.2925

(08) - 3511.5746

Fax: (08) - 3511.7931

Hot Line: 0978.996.122

kd2@cntruongthanh.com


SẢN PHẨM CHÍNH
encoder
sensor
burkert
krohne
kuebler

Cảm Biến - Sensor

Lượt truy cập



TRUONG THANH INDUSTRIAL CO., LTD.
29-31 Dinh Bo Linh Street, Ward 24, Binh Thanh District.
Telephone: 08-6675.2925      Fax: 08-3511.7931
Email: kd2@cntruongthanh.com
Hotline: 0978.996.122
Copyright © 2010 cntruongthanh.com
Phát triển bởi N N H
www.cntruongthanh.com